1. Create a sequence for populating the Customer# column of the CUSTOMERS table. When
setting the start and increment values, keep in mind that data already exists in this table. The
options should be set to not cycle the values and not cache any values, and no minimum
or maximum values should be declared.
2. Add a new customer row by using the sequence created in Question 1. The only data currently
available for the customer is as follows: last name = Shoulders, first name = Frank, and
zip = 23567.

Answer: True

Explanation:

Answer:

amen?...............

Answer:

The answer is below

Explanation:

Case hardening is a form of steel hardening that is applied on mild steel with a high temperature of heat.

It results in material forming a hard surface membrane, while the inner layer is soft.

It is mostly used for universal joints, construction cranes, machine tools, etc.

On the other hand, Through hardening is a form of steel hardening in engineering that involves heat treatment of carbon steel.

It increases the hardness and brittleness of the material.

It is often used for axles, blades, nuts and bolts, nails, etc.

The ongoing success of the new cloud infrastructure can be effectively assessed by monitoring key performance indicators (KPIs) such as uptime, response time, scalability, cost savings, and user satisfaction.

When assessing the ongoing success of the new cloud infrastructure, it is important to prioritize monitoring the overall effectiveness of the services rather than just focusing on cost savings. While cost savings were one of the reasons for choosing a single cloud provider initially, it is crucial to ensure that the chosen services are meeting the company's needs effectively.

Therefore, option B) "Monitor overall effectiveness and shift services to another platform if needed" should be emphasized as the priority for follow-up assessment. This means continuously evaluating whether the cloud services are delivering the desired performance, functionality, reliability, and scalability that the company requires. If any of the services are not compatible with the company's needs or are underperforming, it may be necessary to consider migrating those specific services to another platform or exploring alternative solutions.

Monitoring overall effectiveness involves collecting and analyzing relevant performance metrics, such as response times, uptime, availability, and scalability of the cloud services. It may also involve gathering feedback from users and stakeholders to understand their satisfaction with the services.

By prioritizing the assessment of overall effectiveness, the company can ensure that the cloud infrastructure is delivering the expected benefits and meeting the organization's requirements. This approach allows for flexibility and the ability to adapt and make necessary adjustments to optimize the cloud services over time.

Learn more about overall effectiveness

brainly.com/question/8466650

#SPJ11

Answer: jay is traveling at 4 miles per hour :)

Explanation:

Items such as gloves, safety goggles, shoes, earplugs, respirators, hard hats, coveralls, vests, and full body suits are examples of personal protection equipment.

Wearing a safety helmet when using a power tool, donning the proper protective clothing when working with chemicals, and taking all necessary safety precautions when operating machinery are all examples of how to use equipment correctly to safeguard their own health and the health and safety of their coworkers.

Healthcare Facilities Using PPE Gloves shield the hands; gowns or aprons shield the skin or clothing; masks and respirators shield the mouth and nose; goggles shield the eyes; and face shields shield the full face. consisting of goggles, gloves, gowns, shoe covers, head coverings, masks, and respiratory equipment.

PPE, or personal protective equipment, is gear that shields users from harm to their health or the danger of accidents. It may consist of equipment like safety harnesses, gloves, eye protection, high-visibility clothes, safety footwear, and respiratory protective equipment (RPE).

To learn more about health equipment refer to :

https://brainly.com/question/28489100

#SPJ1

Answer:

Solvents can damage certain plastics and rubbers found in the engine

Explanation:

Mass Conservation:
A1V1 = A2V2
Linear Momentum Conservation:
A1V1^2 + g1H1 = A2V2^2 + g2H2
Combining the above equations gives:
A1V1^2 + g1H1 = A2(A1V1/A2)^2 + g2H2
H2 = H1 + (V1^2/2g2) - (A1V1^2/2g2A2)
Available Energy Conservation:
g1H1 + (1/2)A1V1^2 = g2H2 + (1/2)A2V2^2
Combining the above equations gives:
g1H1 + (1/2)A1V1^2 = g2(H1 + (V1^2/2g2) - (A1V1^2/2g2A2)) + (1/2)A2(A1V1/A2)^2
Jump loss = (g1H1 - g2H2) + (1/2)V1^2(A2/A1 - 1)

How does momentum work?

Momentum, that is created by multiplying a particle's mass by the speed. The momentum has both a magnitude and the direction, it is the vector quantity. The temporal rate of change in momentum equals directly proportional to the force applied on the particle, according to Isaac Newton's second law. Refer to Newton's laws.

To know more about momentum
https://brainly.com/question/24030570
#SPJ1

Therefore, it's essential to select a digital VOM with a current measurement range appropriate for the intended application and to follow the manufacturer's instructions carefully when making current measurements.

The maximum current that can be measured by a digital VOM (Volt-Ohm-Meter) depends on the particular model of the device, as well as the type of current being measured.

Generally speaking, most digital VOMs have a current measuring range of a few milliamps (mA) to several amps (A).

For low current measurements, such as those in the milliamp range, digital VOMs typically have a maximum current measurement range of around 10 mA to 20 mA.

This range is suitable for measuring small currents in low-power electronic devices such as sensors, transducers, and other small components.

For higher current measurements, such as those in the ampere range, digital VOMs typically have a maximum current measurement range of around 10 A to 20 A.

This range is suitable for measuring the current drawn by larger electronic components such as motors, heaters, and other high-power devices.

However, it's important to note that attempting to measure currents beyond the range of the digital VOM can result in damage to the device or personal injury.

For similar questions on digital VOM

https://brainly.com/question/5135212

#SPJ11

Answer:A

Explanation:

Those who want to save money and will use the product for only a few years

Answer:

THE ANSWER is A - those who want to save money and will use the product for only a few years

Explanation: Got it right on edg 2021

The statement that is false with regard to discontinuous chips is given as: "they are formed when machining at high cutting speeds and fine feed rates.

Note that chips that are discontinuous are usually formed when brittle material are machined or when tools are being cut with small rake angles.

Machining at high cutting speeds in addition to fine feed rates will always translate to the creation of continuous chips. Hence the statement is false.

Learn more about machine at:

https://brainly.com/question/30492354

#SPJ4

Answer:

A =41 .....

......

......

....C=21

Answer:

0.00695 A

Explanation:

µ represents \(10^{-6}\). Multiply this by 6,950.

Answer:

If you are driving below 40 mph, you should leave at least one second for every 10 feet of vehicle length.

Answer:

the  half answer is pretty easy just look at it really really good hope this helps..

Explanation:

It is essential to consider both drum runout and mounting issues as potential causes and inspect and rectify them accordingly to ensure accurate and complete cutting during the machining process.

Both Technician A and Technician B could be partially correct.

Technician A is correct in suggesting that a scratch cut that does not go completely around the circumference may indicate drum runout. Drum runout refers to the condition where the surface of the drum is not perfectly round, causing uneven contact between the brake lining and the drum. When performing a scratch cut, if the cutting tool fails to make a complete cut around the drum, it suggests that the drum surface is not uniformly cylindrical, possibly due to drum runout.

Technician B is also correct in stating that incorrect mounting on the lathe can result in a scratch cut that does not go completely around the circumference. If the drum is not mounted securely or centered properly on the lathe, it can lead to an uneven cut. Improper mounting can cause misalignment between the cutting tool and the drum, resulting in an incomplete cut.

Learn more about potential  here

https://brainly.com/question/28300184

#SPJ11

Without additional information on the raceway distance, ambient temperature, and voltage drop, it is impossible to determine the size of the copper service conductors required.

To determine the size of copper service conductors required for a multifamily building with a total demand load of 260 kW for a 120/208V wye, three-phase system, additional information is needed, such as the raceway distance, ambient temperature, and voltage drop. Without this information, it is impossible to accurately calculate the conductor size.

In general, conductor sizing is determined by the National Electrical Code (NEC), which provides guidelines based on various factors, including the load, the type of conductor, the length of the run, and the ambient temperature. To determine the conductor size for this particular situation, a licensed electrician or engineer would need to perform a detailed load calculation and take into account the specific installation requirements and local code regulations.

Learn more about copper service here:

brainly.com/question/14801242

#SPJ1

The metallurgical process in which a metal is obtained in a fused state is called smelting.

Smelting is a technique used to extract metals from their ores by heating them to a high temperature in a furnace. This process involves the use of heat and chemical reactions to separate the metal from the impurities present in the ore.

The ore is usually mixed with a reducing agent, such as coke, which helps in the removal of oxygen from the metal oxide present in the ore. The high temperature causes the metal to melt and separate from the other components of the ore. The molten metal is then collected and cooled down to solidify it into a usable form.

For example, in the smelting of iron ore, the iron oxide is mixed with coke and heated in a blast furnace. The coke acts as a reducing agent, reacting with the oxygen in the iron oxide to produce carbon dioxide gas and molten iron. The molten iron is then tapped out of the furnace and further processed to obtain the desired shape and properties.

Smelting is an important metallurgical process that allows us to obtain metals in a fused state from their ores. This process plays a crucial role in the production of various metals that are widely used in industries and everyday life.

To know more about metallurgical process visit:

https://brainly.com/question/33474948

#SPJ11

The language ? uv : u ∈ l, v ∈ lr ? is the concatenation of a regular language and its reverse, which is also regular. Therefore, it is also regular.

Let l be a regular language over some alphabet Σ. We want to show that the language ? uv : u ∈ l, v ∈ lr ? is also regular, where lr denotes the reverse of language l.

We can construct a finite automaton M that recognizes the language l. To construct a finite automaton for the language? uv : u ∈ l, v ∈ lr ?, we can modify M as follows:

The resulting automaton will accept strings of the form uv, where u is a string in l and v is its reverse, lr. The automaton will accept such strings by starting in s, reading u in M, transitioning to its accept state, then reading v in reverse order and transitioning back to s.

Therefore, the language ? uv : u ∈ l, v ∈ lr ? is regular.

Learn more about regular language here:

https://brainly.com/question/14665563

#SPJ4

v=2v and I^ 0=1 A  

Explanation:          

Apply KCL at node(1)                          
=V-10/8+V/3+V/6=0
=3v-30+8v+4v/24=0
=15v=30

v=30/15

v=2v.        

Therefore:

I^ 0=10-v/8
I^ 0=10-2/8

I^ 0=1 A            

A node in a circuit is previously defined as a point where two or more circuit elements are connected together. Kirchoff’s current law (abbreviated "KCL") states that the sum of all currents entering and exiting a node must equal the sum of all currents entering and exiting the node.

In other words, the net current entering (or leaving) any circuit node must be zero. This law is essentially a statement of charge conservation: if the net current entering any node is greater than zero, there will be a net buildup of charge at a point in a circuit over time.
             

To learn more about ''Kirchoff’s'' current law (KCL)                
https://brainly.com/question/16155576
#SPJ4                
       

Intersections that have traffic signs or signals are called  uncontrolled intersections.

What is signals?
Signals are forms of communication used by living organisms and machines. They are the means by which messages are exchanged between two or more entities. Signals can be visual, auditory, chemical, electrical, and mechanical. They are used to convey information, instructions, and other data. In the context of computing, signals are the messages a computer sends and receives from external sources. Signals can be used to control the flow of data, detect errors, and initiate events. Signals can be used to send information from one unit to another, or from one system to another. Signals can also be used to control the operation of a system or device, or to alert an operator of an error or malfunction. Signals are an important part of communication and are used to transmit data, instructions, and other information between machines and living beings.

To learn more about signals

https://brainly.com/question/17279618

#SPJ4

Answer:

byee byee bbbbbbbbbbbb

The landfill has a volume of 16.2ha * 10m = 162,000m³.

Each week, 765m³ of waste is dumped, which is compacted to half its volume, so 382.5m³ is added weekly.

Annually, this amounts to 382.5m³/week * 52 weeks = 19,890m³/year.

With a total volume of 162,000m³ and an annual addition of 19,890m³, the expected life of the landfill can be estimated by dividing the total volume by the annual addition: 162,000m³ / 19,890m³/year ≈ 8.14 years.

Mass balance diagram: [Landfill (162,000m³)] <-- [382.5m³/week of compacted waste]

Read more about landfill here:

https://brainly.com/question/12745559

#SPJ1

The four red annunciators that trip the master warning light are typically:

1. Engine-related issues: This annunciator is triggered when there are problems with the engine, such as overheating or low oil pressure.

2. Electrical system failure: This annunciator indicates issues with the aircraft's electrical system, such as a generator failure or low battery voltage.

3. Hydraulic system failure: This annunciator is activated when there are problems with the hydraulic system, such as low pressure or fluid leakage.

4. Flight control system failure: This annunciator is tripped when there is a malfunction with the aircraft's flight control systems, like aileron, elevator, or rudder issues.

These 4 red annunciators help alert the pilot to potential problems with critical aircraft systems, and when they trip, the master warning light will illuminate to quickly draw attention to the issue.

to know more about  Electrical system:

https://brainly.com/question/30860562

#SPJ11

If a research team is constructing a pedigree for a trait they expect to show recessive autosomal inheritance in humans, the likely characteristics of this trait would include skipping generations, both parents being carriers, etc.

It's important to note that these characteristics are general tendencies and may vary depending on the specific trait being studied and the individuals involved in the pedigree. Additionally, further analysis and genetic testing would be required to confirm the mode of inheritance and identify the specific gene responsible for the trait.

To learn more about recessive autosomal traits,visit:

https://brainly.com/question/17447924

#SPJ11

Both blocks will feel cold to the touch, but the copper block will feel colder than the concrete block.

This is because metals like copper are good conductors of heat, meaning they transfer heat more quickly than materials like concrete.

When you touch the copper block, it will conduct heat away from your hand faster than the concrete block, giving you the sensation of it being colder.

Additionally, your hand at a temperature of 37°C (98.6°F) is warmer than the room temperature of 23°C (73.4°F), so both blocks will feel colder than your hand.

Learn more about copper on

https://brainly.com/question/24856041

#SPJ1

9514 1404 393

Answer:

  (x, y) = (5.76, 1 5/7)

Explanation:

The location of the centroid in the x-direction is the ratio of the first moment of area about the y-axis to the total area. Similarly, the y-coordinate of the centroid is the first moment of area about the x-axis, divided by the area.

For the moment about the y-axis, we can define a differential of area as ...

  dA = (y2 -y1)dx

where y2 = √(x/k2) and y1 = k1·x^3

The distance of that area from the y-axis is simply x.

So, the x-coordinate of the centroid is ...

  \(\displaystyle c_x=\frac{a_x}{a}=\frac{\int{x\cdot dA}}{\int{dA}}\\\\a_x=\int_0^{12}{x(k_2^{-1/2}\cdot x^{1/2}-k_1x^3)}\,dx=\frac{2}{5k_2^{1/2}}\cdot12^{5/2}-\frac{k_1}{5}12^5\\\\a=\int_0^{12}{(k_2^{-1/2}\cdot x^{1/2}-k_1x^3)}\,dx=\frac{2}{3k_2^{1/2}}\cdot12^{3/2}-\frac{k_1}{4}12^4\\\)

For k1 = 4/12^3 and k2=12/4^2, these evaluate to ...

  \(a_x=115.2\\a=20\\c_x=5.76\)

The y-coordinate of the centroid requires we find the distance of the differential of area from the x-axis. We can use (y2 +y1)/2 for that purpose. Then the y-coordinate is ...

  \(\displaystyle c_y=\frac{a_y}{a}\\\\a_y=\int_0^{12}{(\frac{y_2+y_1}{2}(y_2-y_1))}\,dx=\frac{1}{2}\int_0^{12}{(\frac{x}{k_2}-(k_1x^3)^2)}\,dx\\\\a_y=\frac{12^2}{4k_2}-\frac{k_1^212^7}{14}=\frac{240}{7}\\\\c_y=\frac{12}{7}\approx1.7143\)

The centroid of the shaded area is ...

  (x, y) = (5.76, 1 5/7)