Assume we have a 1D print pattern with a resolution (i. E. , spatial sampling frequency) of 120 dots per cm, which equals approximately 300 dots per inch (dpi) and a total signal length of N= 1800 samples. Calculate the i. Sampling interval [2] ii. Physical signal length [1] iii. The fundamental frequency of this signal (again implicitly assumed to be periodic)
Answers
The calculated values are: i. The sampling interval for the given 1D print pattern is 0.008333 cm. ii. The physical signal length is 15 cm. iii. The fundamental frequency of this signal is 0.0667 Hz.
i. Sampling interval: To calculate the sampling interval, you can use the formula:
Sampling interval = 1 / (Resolution in dots per cm)
In this case, the resolution is 120 dots per cm, so the sampling interval is:
Sampling interval = 1 / 120 = 0.008333 cm
ii. Physical signal length: To find the physical signal length, use the formula:
Physical signal length = Total number of samples / Resolution in dots per cm
With a total signal length of N = 1800 samples and a resolution of 120 dots per cm, the physical signal length is:
Physical signal length = 1800 / 120 = 15 cm
iii. Fundamental frequency: The fundamental frequency can be calculated using the formula:
Fundamental frequency = 1 / Physical signal length
Now that we have the physical signal length, we can calculate the fundamental frequency:
Fundamental frequency = 1 / 15 = 0.0667 Hz
i. The sampling interval for the given 1D print pattern is 0.008333 cm.
ii. The physical signal length is 15 cm.
iii. The fundamental frequency of this signal is 0.0667 Hz.
To know more about frequency visit:
https://brainly.com/question/14680642
#SPJ11
Related Questions
WILL MARK A BRAINLIEST!!! PLS HELP!!!
Never gonna give you up
Never gonna let you down
Never gonna run around and desert you
Never gonna make you cry
Never gonna say goodbye
Never gonna tell a lie and hurt you
Answers
Answer:
man, just got rick rolled brb going to cry
Explanation:
Daijōbu desho. Datte Kimi yowai mon.
The refine area in the search tab of the ribbon provides quick options for the refining your search including?
Answers
The refine area in the search tab of the ribbon provides quick options for refining your search including Advanced Search, filter option, Outlook ribbon, etc.
What is the process of refining your search results?The process of refining your search results describes the methodology through which you can also select a category within the Refine group to further filter your search results:
From, only shows results from a specific person. The subject only shows results based on the subject. Has Attachment – only shows emails that have attachments.
Based on your preference, you can use Advanced Search by clicking the filter button on the right side of the search box. Alternatively, the Outlook ribbon will change to show the Search tab and you use any of the options in the Refine group to refine your search results.
Therefore, the refine area in the search tab of the ribbon provides quick options for refining your search including Advanced Search, filter option, Outlook ribbon, etc.
To learn more about Outlook search, refer to the link:
https://brainly.com/question/24165533
#SPJ1
how many computers are in the world
Answers
Answer:According to Worldometer, there are over 73 million computers in the world. This data takes into account other kinds of computers such as laptops, tablets, and smartphones.
Explanation:
HISTORIA DE LAS PRINCIPALES CUENTAS CONTABLES Y DE LOS DOS ESTADOS FINANCIEROS
MENCIONAR LAS CUENTAS Y SUB CUENTAS EN CADA CASO.
Answers
Answer:
Sorry bud, i dont speak spanish, especially not ALL CAPS SPANISH.
Explanation:
this is your question in english:
HISTORY OF THE MAIN ACCOUNTS AND THE TWO FINANCIAL STATEMENTS.
MENTION THE ACCOUNTS AND SUB ACCOUNTS IN EACH CASE.
what class of arthropods is mainly involved in the pollination process?
Answers
Answer:
Insects
Explanation:
insects are the most pollinating arthropods.
codehs python 4.7.6 Powers of Two
it says I'm wrong because I need
Answers
\(\huge\fbox\orange{A} \huge\fbox\red{N}\huge\fbox\blue{S}\huge\fbox\green{W}\huge\fbox\gray{E}\huge\fbox\purple{R}\)
\(\huge\underline\mathtt\colorbox{cyan}{in attachment}\)
Following are the program to calculate the power of two:
Program Explanation:
Defining an integer variable "i" that hold an integer value.Defining a for loop that checks "i" value in between 20, inside this it calculates power of two.At the last use print method to print its value.Program:
i=1#holding integer value in i
for i in range(20):#defining a for that starts 1 to 20
i = 2 ** i#calculate power of 2 in i variable
print(i)#print value
Output:
Please find the attached file.
Learn more:
brainly.com/question/23170807
2. what is the bootstrap program functionality in the system?
Answers
The bootstrap program is a program or a sequence of codes that the computer system automatically runs during its start-up to load and initialize the operating system into the memory. The bootstrap program functionality is to load the operating system into the computer memory so that the CPU can perform the necessary operations.
The bootstrap program is stored in the ROM (Read-Only Memory) chip or the BIOS (Basic Input Output System) chip of the computer system, and it works independently of the operating system. It is the first code that the CPU executes after power on, and it executes the instructions in sequence from the BIOS chip.
The bootstrap program performs the following functions:
1. Power-On Self Test (POST): The bootstrap program starts with the Power-On Self Test (POST) to check the system hardware for any malfunction. The POST checks the RAM, Processor, Input-Output devices, and other critical components of the system to ensure they are working correctly. If any error occurs, the system stops, and the user is alerted with an error message.
2. Boot Loader: Once the system hardware has been checked, the bootstrap program loads the boot loader into the memory. The boot loader is responsible for locating the operating system on the hard disk and loading it into the memory.
3. Kernel Initialization: Once the operating system is loaded into the memory, the bootstrap program hands over the control to the kernel of the operating system. The kernel initializes the system resources such as memory management, process management, file system management, and other essential resources.
To know more about bootstrap visit:
https://brainly.com/question/13014288
#SPJ11
you can use the syntax /* and */ to accomplish what function when working with large portions of text?
Answers
When working with vast amounts of text, the comment function can be achieved using the syntax /and/.
What is an illustration of syntax?The study of syntax in linguistics deals with the way that words and morphemes come together to form longer units like phrases and sentences. The relationship between form and meaning, word order, grammatical relationships, agreement, hierarchical sentence structure (constituency), the nature of cross-linguistic diversity, and hierarchical sentence structure are all central topics of syntax (semantics). The fundamental presumptions and objectives of the various approaches to syntax vary. For grammatical components like subjects, verbs, direct and indirect objects, etc., syntax in English specifies a particular order. For instance, the right order is subject verb direct object when there is a verb, a direct object, and a subject in a sentence.To learn more about syntax, refer to:
https://brainly.com/question/28497863
61. Select an activity of the Production Phase: a. a web authoring tool is often used b. the graphics, web pages, and other components are created c. the web pages are individually tested d. all of the above
Answers
Answer:
d. all of the above.
Explanation:
Since the advent of digital technology, production of goods and services have experienced a significant change from the traditional methods of production. This paradigm shift is made possible by the application of various modern technology.
Production processes are generally being facilitated and enhanced by the use of;
1. Computer-integrated manufacturing (CIM).
2. Computer-aided process planning (CAPP).
3. Computer-aided design (CAD).
4. Computer numerical control (CNC).
In the process of selecting an activity of the production phase:
1. A web authoring tool is often used.
2. The graphics, web pages, and other components are created.
3. The web pages are individually tested.
To improve readability, what color background should I use
with dark purple text.
Answers
Answer:
umm probably white or any light color
Explanation:
cuz if you put similar colors whether color or the darkness it will be hard to read cuz its similar. ofc if you do a dark color for text you can use a much lighter shade of that color
What should you do in order to have access to the header and footer tools? Open the View tab. Open the Page Setup dialog box. Open the header or footer. Click and drag the header down to the footer.
Answers
Answer:
Step 1 - Open the View tab.
Step 2 - Open the Page Setup dialog box
Step 3 - Open the header and footer tool.
Step 4 - Click OK.
Explanation:
In order to access to the header and footer tools
Step 1 - Open the View tab.
Step 2 - Open the Page Setup dialog box
Step 3 - Open the header and footer tool.
Step 4 - Click OK.
There isnt a photoshop catagory for this but I was wondering if anyone knows the answer to this. Thank you guys! ^-^
Answers
Answer:
Hi, there I'm currently certified in Photoshop and recently I pass Adobe Illustrator
Explanation:
The last one with red blue and yellow is primary
The first one Secondary
The second one is Tertiary
Hope this helps :)
Answer:
hey Lori its been a while I miss you. can we talk again?
"ICT in education is very helpful for all types of learner" justify
Answers
"ICT in education is very helpful for all types of learner" because:
ICTs is one that often boast the quality of educationIt increases the learner motivation and also their engagement in learning.It boast or quickens the acquisition of a lot of basic skills.It is known to often enhance teacher training. What are the benefits of using ICT in education?ICTs are known to be a kind of transformational tools that when it is used in the right way can lead to a shift to a form of learner-centered environment.
The Advantages of ICT are:
They are known to be Cost Effective. They are known to be AutomatedThey tend to act as a Bridging of cultural divide. They help in the Creation of new jobs.Therefore, "ICT in education is very helpful for all types of learner" because:
ICTs is one that often boast the quality of educationIt increases the learner motivation and also their engagement in learning.It boast or quickens the acquisition of a lot of basic skills.It is known to often enhance teacher training.Learn more about ICT from
https://brainly.com/question/20717870
#SPJ1
Why did we decide to send a message as a sequence of two options rather than modifying our devices to represent more options?
Answers
Answer:
Following are the solution to this question:
Explanation:
Please find the complete question in the attachment file.
The binary message is also an XML text SMS, which is used to represent in binary character. It may also flag the binary text as binary, and it can attach the UDH as just the start of its message. In this question, we assume that you can include A and B because there could be no more than 2 choices in such a binary message.
We decided to send a message as a sequence of two states (A and B) rather than modifying our devices to represent more states (State C, State D, State E, etc.) primarily for simplicity and efficiency.
Using a binary communication system with just two states is straightforward and easier to implement than introducing more complex modifications for additional states.
Binary communication allows for clear and unambiguous encoding and decoding, making it more reliable and less prone to errors.
While using more states could potentially convey more information, it would also require more complex hardware and software, increasing the risk of communication errors and complicating the overall system design and operation.
Know more about binary communication:
https://brainly.com/question/32447290
#SPJ3
Your question is incomplete, but most probably your full question was.
Why did we decide to send a message as a sequence of state (A and B) rather than modifying our devices to represent more State (State C, State D, State E,....)?
Staples print shop prints whatever the customer requests. What class of technology does it use?.
Answers
In the technology education class, students experiment with project learning and learn about common technologies by doing it themselves.
Technology-related skills are contemporary handicrafts that can be used for artistic expression. Students that use technology in the classroom are more engaged with the lessons being taught. EdTech empowers students to become active learners through everything from online educational games to immersive virtual reality. Gamification that is challenge-based, for instance, can boost students' performance by as much as 89%. IT is a wide field that includes many different technologies. This also implies that job seekers wishing to succeed in the IT sector have a wide range of possibilities to pick from, including, among others, artificial intelligence, blockchain, internet of things, and big data.
Learn more about technology here-
https://brainly.com/question/9171028
#SPJ4
how do I learn coding???
Answers
Answer:
FIERST LEAR JS ( JAVIA SCRAP) NEXT DM ME ON DISCORD WHEN YOU HAVE THE BASE LERAL ON KAHN ACIMADY
Explanation:
Answer:codeacedmy
Explanation:it gives the best coding tutions
The mathematical rule that Excel follows to perform calculations in a formula in the proper order is called the:
Answers
The mathematical rule that Excel follows to perform calculations in a formula in the proper order is called the order of operations"
Excel calculates according to the acronym PEMDAS, which stands for Parentheses, Exponents, Multiplication and Division, and Addition and Subtraction. This computation order can be changed by using parenthesis.
Using specified data in a particular order, a function is a preset formula that conducts calculations. Common functions that can be used to rapidly determine the sum, average, count, maximum value, and minimum value for a range of cells are included in all spreadsheet systems.
Thus, order of operations.
For more information about Excel, click here:
https://brainly.com/question/30911293
#SPJ4
Some of your friends are working for CluNet, a builder of large commu- nication networks, and they are looking at algorithms for switching in a particular type of input/output crossbar. Here is the setup. There are n input wires and n output wires, each directed from a source to a terminus. Each input wire meets each output wire in exactly one distinct point, at a special piece of hardware called a junction box. Points on the wire are naturally ordered in the direction from source to terminus; for two distinct points x and y on the same wire, we say that x is upstream from y if x is closer to the source than y, and otherwise we say x is downstream from y. The order in which one input wire meets the output wires is not necessarily the same as the order in which another input wire meets the output wires. (And similarly for the orders in which output wires meet input wires. ) Figure 1. 8 gives an example of such a collection of input and output wires. Now, here’s the switching component of this situation. Each input wire is carrying a distinct data stream, and this data stream must be switched onto one of the output wires. If the stream of Input i is switched onto Output j, at junction box B, then this stream passes through all junction boxes upstream from B on Input i, then through B, then through all junction boxes downstream from B on Output j. It does not matter which input data stream gets switched onto which output wire, but each input data stream must be switched onto a different output wire. Furthermore—and this is the tricky constraint—no two data streams can pass through the same junction box following the switching operation. Finally, here’s the problem. Show that for any specified pattern in which the input wires and output wires meet each other (each pair meet- ing exactly once), a valid switching of the data streams can always be found—one in which each input data stream is switched onto a different output, and no two of the resulting streams pass through the same junc- tion box. Additionally, give an algorithm to find such a valid switching
Answers
This issue can be illuminated using a variation of the classic greatest stream issue in raph theory
What is the algorithm?To begin with, we speak to the input and yield wires as vertices in a bipartite chart, with the input wires on the cleared out and the output wires on the correct.
At that point, we draw an edge between an input wire and an yield wire in the event that and as it were in case they meet at a intersection box. At last, we dole out a capacity of 1 to each edge, since each intersection box can only oblige one information stream. Presently, ready to discover a greatest stream in this chart utilizing any calculation for greatest stream, such as the Ford-Fulkerson calculation or the Edmonds-Karp calculation.
Learn more about algorithm from
https://brainly.com/question/24953880
#SPJ1
A team is planning for a date-driven projects. The team's expected velocity is 8 story points, the project has 10 iterations, and the following shows the story points of user stories in priority order:
ID 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
Story Point 8 5 13 8 3 13 5 8 5 13 3 2 20 2 2 13 8 5
Which user stories (using ID range) should be included for the project.
Answers
Based on the cumulative sums, the user stories with the IDs 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, and 12 should be included in the project.
Which user stories (using ID range) should be included in the project based on the team's expected velocity, iterations, and story point priorities?To determine which user stories should be included in the project based on the team's expected velocity of 8 story points and 10 iterations, we need to select user stories that have a cumulative sum of story points equal to or less than the available capacity.
Calculating the cumulative sum of story points:
ID: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18Story Pt: 8 5 13 8 3 13 5 8 5 13 3 2 20 2 2 13 8 5Cumulative: 8 13 26 34 37 50 55 63 68 81 84 86 106 108 110 123 131 136These user stories have a cumulative sum of story points less than or equal to 80, which is the team's expected velocity over 10 iterations.
Therefore, the user stories to be included in the project are: ID 1-12.
Learn more about cumulative sums
brainly.com/question/31977156
#SPJ11
do you think you have the qualities of an enterpreneur in you? If yes, give examples when you have shown these qualities.
Answers
The quality that all successful entrepreneurs must possess is determination and the ability to take action. They have to think and make decisions quickly and they discipline themselves to act and implement their decisions.
What is entrepreneurs?An entrepreneur is defined as a person who has the ability and desire to establish, manage and succeed in a start-up company with his own risks, in order to generate profit.
It is classified into the following types:
Small Business- Scaling of Initial Business Large Corporate Business Social Business5 Qualities of a Better Entrepreneur
Willingness to fail. Fear of failure is a common affliction.Critical Thinking. As the first trait, critical thinking enables entrepreneurs to move away from the herd mentality Clarity of Vision. Use yourself. Strong communication.Entrepreneurship accelerates economic growthEntrepreneurs are important for a market economy because they can act as the wheels of a country's economic growth. By creating new products and services, they increase new jobs, which ultimately leads to an acceleration of economic development.
To learn more about entrepreneurs, refer;
https://brainly.com/question/13897585
#SPJ9
Find out how to print the below pattern in python and also come up with pseudocode,
you have to use for loop for this, you can use a for loop inside the outer for loop.
You can't use operator like " *" in python , only use print statement to print the below pattern. Find out how to print in 5 lines one by one in python , there is a way to print one line then next
X
XXX
XXXXX
XXXXXXX
XXXXXXXXX
Answers
Answer:
for i in range(5):
for j in range(2*i + 1):
print("*", end="")
print()
Explanation:
for row index going from 0 to 5
for column index going from 0 to 2*row index + 1
print * suppressing new line
print a new line to move to next row
Question 1 (5 points) When you are at a job interview, you should use effective communication strategies, like formal language. What is formal language and why do we use it? Formal language helps create the impression that the speaker is an expert on the topic. It suggests to audience members that the speaker's points deserve respectful consideration, and it presents the ideas of the speech in the most polished possible way.. Formal language is archaic and derived from Shakespeare to help us sound fancy in order to ensure that an employer can see that we are versatile Formal language is our ability to speak more than just one language. If we are bilingual, we have a better chance at being hired.
Answers
This prompt is about formal oanguage and styles of communication. See the explanation below.
What is formal language and why do we use it ?Formal language refers to a style of communication that follows specific grammatical and linguistic conventions, typically associated with academic, professional, or formal settings. It is characterized by the use of proper grammar, syntax, and vocabulary, and avoids slang or colloquial expressions.
We use formal language in job interviews to convey professionalism, competence, and respect for the setting and the interviewer. It also helps to convey our ideas in a clear and concise manner, without the distractions of informal language.
Contrary to the notion that formal language is archaic or derived from Shakespeare, it is a contemporary and widely used mode of communication in formal settings. It is not related to bilingualism, which refers to the ability to speak two languages fluently.
Learn more about formal language:
https://brainly.com/question/24222916
#SPJ1
__ is a process of adding details to a model to make it less abstract.
• abstraction
• decomposition
• pattern recognition
• refinement
Answers
Answer:refinement
Explanation:
Answer:
refinement
Explanation: just checked
Choose the term so achieve the output shown.
>>>import math
>>>math. ___ (36)
6.0
•Sqr
•Root
•sqrt
Answers
Answer:
sqrt
Explanation:
Answer:
sqrt
Explanation:
sqrt= square root
sqrt of 36 is 6
How to you convert (both positive and negative integers) denary to Two’s complement and vice versa?
Answers
Answer:
To convert from decimal to binary, one approach is to repeatedly divide by 2 as integer division and write down the remainders from right to left:
example: convert 26 to binary
26 / 2 = 13, no remainder => write down 0
13 / 2 = 6, remainder 1 => write down 1
6 / 2 = 3, no remainder => write down 0
3 / 2 = 1, remainder 1 => write down 1
1 / 2 = 0, remainder 1 => write down 1
So 11010 is your result.
For 2's complement, you have to consider youre entire word size. Let's say you have 8 bit representations, then 11010 is really 00011010.
To get the 2's complement, you invert the binary represenation and add 1:
00011010 => 11100101
11100101 + 1 = 11100110 (understand binary addition for this)
So 11100110 is the binary representation of -26.
You can do this entire sequence in reverse, i.e. subtract one, invert and then go back to the decimal representation:
11010 in decimal is 1·2⁴ + 1·2³+ 0·2²+ 1·2¹+ 0·2⁰ = 26
Should spreadsheets be used to maintain a checkbook?
YES
NO
Answers
Yes, because it keeps all your data organized and allows you to see the trend and growth of your data by automatically creating different types of charts and graphs to help you visualize your data.
Hope that helps!
15. It is the process of capturing data or translating information to recording format
A. Documentation
C. Production Report
B. Reporting
D. Output
Answers
Answer:
A Documentation, hope this helps.
Your dashboard shows total cars sold by city. how will the data be impacted if you set a condition filter for sum of cars sold greater than 100?
Answers
The data be impacted if you set a condition filter for sum of cars sold greater than 100 as the dashboard will only depict the cities that has more than 100 cars are sold.
What is filter pf pages or picture?Image or page filtering is known to be the act of altering or changing the form of an image and also reducing a page to the items that one wants.
Note that in filtering, it tends to bring about those areas that one has interest in and as such, in the case above, The data be impacted if you set a condition filter for sum of cars sold greater than 100 as the dashboard will only depict the cities that has more than 100 cars are sold.
Learn more about filter from
https://brainly.com/question/3198358
#SPJ1
access to opportunities at cloud kicks should be restricted. sales users should only have access to two categories of opportunities: opportunities they own, and opportunities that are tied to accounts they own. what are two actions a consultant can take to meet the requirement? choose 2 answers
Answers
The correct option are-
B. Set opportunity access on the role to view all opportunities associated with their accounts.C. Set organization-wide defaults for opportunities to Private.Explain the term cloud kicks?Using Data Loader, Cloud Kicks (CK) is transferring Account and Contact data from just a vintage CRM system into Salesforce.
Any hosted service that is offered online is referred to as cloud computing. These services frequently consist of servers, database, software, networks, analytics, and other cloud-operated computer tools.Users of the service can access files and applications stored on the cloud from any location, doing away with the need to constantly be close to actual hardware. For instance, user-created spreadsheets and documents used to need to be saved to just a physical hard disk drive, USB device, or disc.For the stated question-
Opportunities from cloud kicks should only be accessible to certain people. Only the opportunities they possess and the opportunities connected to the accounts they own should be available to sales users.
There are two ways a consultant can fulfil the requirement:
To examine all opportunities connected to their accounts, the role must have opportunity access set.Set Opportunities' organization-wide defaults to Private.To know more about the cloud kicks, here
https://brainly.com/question/30087928
#SPJ4
The complete question is-
Access to opportunities at cloud kicks should be restricted. sales users should only have access to two categories of opportunities: opportunities they own, and opportunities that are tied to accounts they own.
what are two actions a consultant can take to meet the requirement? choose 2 answers.
A. Set Territory Management to grant Read access to opportunities owned by others.
B. Set opportunity access on the role to view all opportunities associated with their accounts.
C. Set organization-wide defaults for opportunities to Private.
D. Set organization-wide defaults for opportunities to Public Read-Only
Which statement is not true for a good algorithm?
A. It is clear and cannot be interpreted in more than one way by
different people or machines.
B. It successfully solves the desired problem or performs the desired
task.
C. It can perform a task or solve a problem even if various inputs are
involved.
O D. It uses more resources and more time than it needs to.
Answers
Answer:
D. It uses more resources and more time than it needs to.
Explanation:
A, B, and C each show the workload of an algorithm in positive light. However, D shows it using more resources and time than it needs to; something a "good" algorithm would not do.