Sensors are used to monitor the pressure and the temperature of a chemical solution stored in a vat. The circuitry for each sensor produces a HIGH voltage when a specified maximum value is exceeded. An alarm requiring a LOW voltage input must be activated when either the pressure or the temperature is excessive. Design a circuit for this application
Answers
Related Questions
Sadie is the props manager for a small community theater. Because she does not have a part onstage, Sadie is not part of the Performing Arts pathway of the Arts, AV Technology and Communication cluster.
True
False
Answers
Answer:
I think it is false!
Explanation:
Answer: I think it's true
Explanation:
Because if you were part of a play, you would have a part but if you work on props, you don't have a part onstage.
If an individual is caught smoking in high school, what aspect of life would the differential association theorist be interested in order to understand how that person started smoking?
Answers
The aspect of life that would the differential association theorist be interested in order to understand how that person started smoking is option a: smoking habits of peers, family, and friends.
Is smoking a habit or a lifestyle?The act of Smoking is known to be a hard habit that is said to be difficult to break for a lot of reasons.
Note that it is one where a person is said to be only nicotine addictive, but smokers are said to be the smoke multiple times a day.
Therefore, The aspect of life that would the differential association theorist be interested in order to understand how that person started smoking is option a: smoking habits of peers, family, and friends
Learn more about smoking habits from
https://brainly.com/question/15967133
#SPJ1
See full question below
If an individual is caught smoking in high school, what direction would a differential association theorist go in examining how that person started smoking?
smoking habits of peers, friends, and family
strain caused by society's structure that leads to smoking
the student's self-control
how this student was identified when everyone is equally susceptible
Which of the following defines context?
the ability to find new ways of thinking about a problem
the condition in which a problem exists
the study of the theoretical nature of an event
the problem-solving technique of an engineer
Answers
Answer:
The condition in which a problem exists
Explanation:
Context is the situation surrounding information, e.g. if you don't understand a word in a passge you can look for "context clues" where you use surrounding words to infer the meaning of the unknown one
What are the philological elements of interior design most like?
o a well-selected outfit that gives people an idea of who the wearer is
a public address glven via the intercom system of a large building
o a perfectly written letter that exactly conveys the writer's point
o a complex but silent conversation between two people in sign language
Answers
Answer:
Ea public address glven via the intercom system of a large buildingxplanation:
An Elliptical Cross-Trainer on Three Wheels?
Answers
An elliptical cross-trainer on three wheels is not a common exercise equipment configuration.
Elliptical cross-trainers typically have a stationary frame with two pedals and two handles that move back and forth. This design allows for a low-impact cardiovascular workout that mimics the motion of walking or running. A three-wheeled configuration would significantly alter the design and motion of the elliptical cross-trainer. It could potentially make the exercise more challenging and engaging by introducing a balance component, but it could also compromise the stability and safety of the machine. Overall, an elliptical cross-trainer on three wheels would be an unconventional exercise equipment design that would require careful consideration and testing before being used for exercise.
Learn more about configuration here:
https://brainly.com/question/30278465
#SPJ4
A conventional steering system has all of the following except
Answers
Tie rod
What is the correct order of steps in the scientific method
Answers
Answer:
1) Make a hypothesis, about what u think will happen if you do something
2) conduct the experiment
3) analyze and see what happens
4) do it several more times and compare ur answers
5) make a conclusion from ur answers
6) celebrate bc u done
8. if you have a tire blowout: pump the brakes rapidly and pull off the road do not brake, but slow down and pull off the road turn the wheel in the direction of the skid
Answers
Answer:
Explanation:
Hold the steering wheel firmly and keep your car in the same lane. There may be a strong pull to the right or left.
Let your car slow down. Don't use the brakes until you have slowed to a safer speed.
Then brake gently and pull all the way off the road into a safe area.
If you ever find yourself in a situation where you experience a tire blowout while driving, it's important to know what steps to take to avoid further danger. In this scenario, pumping the brakes rapidly and pulling off the road, not braking but slowing down and pulling off the road, and turning the wheel in the direction of the skid are all essential actions to take.
First and foremost, it's important to avoid braking when experiencing a tire blowout. Pumping the brakes rapidly can cause the vehicle to spin out of control, increasing the risk of an accident. Instead, slow down gradually and pull off the road as soon as possible. This will give you the opportunity to inspect the damage and determine the best course of action.
Turning the wheel in the direction of the skid is also crucial. This means if the car pulls to the left, turn the wheel to the left, and vice versa. This will help you maintain control of the vehicle and prevent it from swerving or spinning out of control.
In conclusion, if you experience a tire blowout while driving, it's important to remain calm and take the necessary steps to ensure your safety. Avoid braking, slow down and pull off the road, and turn the wheel in the direction of the skid to maintain control of the vehicle. By following these steps, you can minimize the risk of an accident and get back on the road safely.
To learn more about tire blowout, visit:
https://brainly.com/question/11842754
#SPJ11
The U.S. Census Bureau projects population based on the following assumptions: a. One birth every 7 seconds b. One death every 13 seconds c. One new immigrant every 45 seconds Write a program to display the population for each of the next five years. Assume that the current population is 312,032,486, and one year has 365 days. Here is a sample run: year 1: 314812582 year 2: 317592679 year 3: 320372776 year 4: 323152872 year 5: 325932969
Answers
The below program calculates and displays the projected population for each of the next five years based on the assumptions of one birth every 7 seconds, one death every 13 seconds, and one new immigrant every 45 seconds.
current_population = 312032486
seconds_per_year = 365 * 24 * 60 * 60 # Number of seconds in a year
birth_rate = 1 / 7
death_rate = 1 / 13
immigrant_rate = 1 / 45
population = current_population
for year in range(1, 6):
population += birth_rate * seconds_per_year
population -= death_rate * seconds_per_year
population += immigrant_rate * seconds_per_year
print(f"year {year}: {int(population)}")
When you run this program, it will display the population for each of the next five years, starting from the current population of 312,032,486.
The birth, death, and immigration rates are used to calculate the population changes per year.
year 1: 314812582
year 2: 317592679
year 3: 320372776
year 4: 323152872
year 5: 325932969
To learn more on Python click:
https://brainly.com/question/30391554
#SPJ4
I need a detailed solution for the multi part question
Answers
Answer:
z=X=c+J=A
Explanation:
A "calorie" is a unit of energy, defined as the amount of energy needed to raise the temperature of one gram of water by one degree Celsius. The nutritional labels on food products typically tell you how many calories of digestible energy are in one serving of food, where "digestible" means that the energy stored in the chemical bonds of the molecules comprising the food can be extracted by your body. (Water for example has energy, but that energy is not chemically accessible via digestion.) To simplify understanding for typical consumers, the "calories" reported on nutritional labels actually represent kilocalories: a 170 calorie can of beer actually contains 170,000 calories of digestible energy.
i) If a student foolishly decides to binge drink 21 beers on their 21t birthday, how many gallons of water could they have heated from room temperature (24 °C) to boiling (100 C) using an equivalent amount of digestible energy in the beer? Recall that one gallon of water is roughly 8 pounds.
ii) What is this energy equivalent to in BTU? A "BTU" or British Thermal Unit is also a unit of energy, defined as the amount of energy needed to raise the temperature of one pound of water by one degree Fahrenheit
iii) If you had purchased an equivalent amount of electrical energy in kW-hr from the utility company, how much would you have to pay? Is this cheaper than buying beer?
Answers
A "calorie" is a unit of energy that is defined as the usually inform you of the number of calories of digestible energy present in one serving of food. 21 beers times 17 calories per beer equals 357 calories.
What is "calorie"?Calories are units of energy that a food or drink provides. You can usually find calorie counts listed on food items, and wearables like the best fitness trackers allow you monitor how many calories you're burning by doing different activities. Certain foods, such as fatty, fried, or processed foods, tend to have more calories. Other foods, such as fresh fruit and vegetables, tend to have fewer calories. However, some healthy fruits and vegetables can be high in calories, while low-calorie foods, such as diet soda, don’t provide any nutritional value. We need calories to give us enough energy to move around, stay warm, grow, work, think, and play. Even our blood circulation and digestion need the energy gained from calories in order to function well.To learn more about blood circulation refer to:
https://brainly.com/question/20393668
#SPJ4
A 2-dimensional 3x3 array of ints, has been created and assigned to tictactoe. Write an expression whose value is true if the elements of any row or column or diagonal are equal.
This is my current java code, and I'm definitely missing something, any help would be appreciated:
tictactoe[0][0] == tictactoe[0][1] && tictactoe[0][0] == tictactoe[0][2] || tictactoe[0][0] == tictactoe[1][0] && tictactoe[1][0] == tictactoe[2][0] || tictactoe[0][2] == tictactoe[1][1] && tictactoe[0][2] == tictactoe[2][0];
Answers
Answer:it looks complete d to me
Explanation:
it looks like you have all of it
The three cables in the figure are lifting a machine that has a weight of F = 20kN. How do I go about determining the force in cables AB, AC, and AD?
Answers
Answer:
To determine the force in cables AB, AC, and AD, you need to use the equation for equilibrium in three dimensions:
FAB + FAC + F_AD = F
Where F is the total force exerted by the machine.
In order to solve this equation, you need to know the angle between cable AB and AC (θ), and the distance between the two points (d). Using these values, you can calculate the force in each cable as follows:
FAB = F * cos(θ) FAC = F * sin(θ) F_AD = F * (1 - cos(θ) - sin(θ))
In this example, if the angle between cable AB and AC is 30°, and the distance between the two points is 5m, then the force in each cable would be:
FAB = 20kN * cos(30°) = 17.3kN FAC = 20kN * sin(30°) = 10kN F_AD = 20kN * (1 - cos(30°) - sin(30°)) = 2.7kN
The tension forces in each cable can be determined by subtracting the tension in the other cables from the total force F.
What is tension forces?Tension forces are a type of force that acts along the length of an object. These forces are created by the stretching of an object and are usually measured in Newtons.
Tension forces can be found in a variety of different objects such as ropes, strings, wires, and cables. It can also be found in other objects such as springs and muscles. Tension forces can have a variety of effects on an object depending on the direction and magnitude of the force.
The forces acting on the body in the x-direction can be written as:
Fx = TAB - TAC - TAD = 0
Where TAB, TAC, and TAD are the tension forces in cables AB, AC, and AD respectively.
Therefore, we can solve for the tension forces in each cable:
TAB = TAC + TAD = F = 750 N
TAC = TAB - TAD = 750 N - TAD
TAD = TAB - TAC = 750 N - TAC
Therefore, the tension forces in each cable can be determined by subtracting the tension in the other cables from the total force F.
To learn more about tension forces on:
brainly.com/question/30089732
#SPJ2
It's the law. Under New York law, you can get a citation for riding your bike while listening to music using headphones or earbuds in both ears. It is lawful, however, to listen to music with only one earbud keeping the other ear free.
Sensory deprivation. One of the main ways that people alert each other to danger on the road is through sound. Whether it's honking, yelling or ringing a bicycle bell, you're less likely to hear any of these warnings if you're listening to music putting you at higher risk of an accident.
Decreased attention. The more stimuli you have to contend with, the more difficult it is to dedicate your full attention to one particular task. If you get caught up in a song or story you're listening to while cycling, it can increase your distractibility which could have disastrous consequences.
The majority of cycling-related accidents involve a cyclist and a motor vehicle. Not surprisingly, the injuries a cyclist suffers in such collisions tend to be disproportionately serious and often fatal. Therefore, if you're cycling in traffic, foregoing the headphones can prove to be a life-saving decision.
Answers
Answer:s
Explanation:s
It's the law. Under New York law, you can get a citation for riding your bike while listening to music using headphones or earbuds in both ears. It is lawful, however, to listen to music with only one earbud keeping the other ear free.
Sensory deprivation. One of the main ways that people alert each other to danger on the road is through sound. Whether it's honking, yelling or ringing a bicycle bell, you're less likely to hear any of these warnings if you're listening to music putting you at higher risk of an accident.
Decreased attention. The more stimuli you have to contend with, the more difficult it is to dedicate your full attention to one particular task. If you get caught up in a song or story you're listening to while cycling, it can increase your distractibility which could have disastrous consequences.
The majority of cycling-related accidents involve a cyclist and a motor vehicle. Not surprisingly, the injuries a cyclist suffers in such collisions tend to be disproportionately serious and often fatal. Therefore, if you're cycling in traffic, foregoing the headphones can prove to be a life-saving decision.
Illinois furniture , Inc produces all types of coffee furniture the executive secretary is a chair that has been designed using ergonomics to provide comfort during long work hours the chair sells for $130 there are 480 minutes available during the day and the average daily demand has been 50 chairs there are eight tasks
Answers
This question is incomplete, the complete question is;
Illinois furniture , Inc produces all types of office furniture. The "Executive Secretary" is a chair that has been designed using ergonomics to provide comfort during long work hours the chair sells for $130. There are 480 minutes available during the day and the average daily demand has been 50 chairs. There are eight tasks.
TASK PERFORMANCE TIME( MIN ) TASK MUST FOLLOW TASK LISTED
A 4 ---------
B 7 ----------
C 6 A,B
D 5 C
E 6 D
F 7 E
G 8 E
H 8 F,G
1) What is the cycle time for operation?
2) What is the theoretical minimum number of workstation?
Answer:
1) the cycle time for operation is 9.6 min
2) the theoretical minimum number of workstation is 5
Explanation:
Given the data in the question;
production time per day = 480 minutes
average daily demand = 50
Given the data in the question;
1) cycle time for operation
this is simply referred to as the total time for the process from start to finish.
cycle time = production time per day / units demand per day
we substitute
cycle time = 480 min / 50
cycle time = 9.6 min
Therefore, the cycle time for operation is 9.6 min
2) theoretical minimum number of workstation.
theoretical minimum number of workstation = total task time / cycle time
Total task time = ( 4 + 7 + 6 + 5 + 6 + 7 + 8 + 6 ) = 49 min
∴ theoretical minimum number of workstation = 49 min / 9.6 min
theoretical minimum number of workstation = 5.104 ≈ 5
Therefore, the theoretical minimum number of workstation is 5
What is needed to overcome the factors that affect phase transformation? O Driving Force O Homogeneity O Diffusion O Grain Size
Answers
To overcome the factors that affect phase transformation, a sufficient driving force, homogeneity of the material, proper diffusion, and appropriate grain size are needed.
Phase transformation is the process of changing one phase of a material into another, which is influenced by various factors such as temperature, pressure, composition, and microstructure. In order to overcome these factors, a sufficient driving force is necessary, which can be achieved by increasing the temperature or decreasing the size of the stable phase. Homogeneity of the material is also crucial to ensure a uniform distribution of the driving force and prevent any localized variation in the transformation.
Proper diffusion is required to facilitate the movement of atoms or molecules across the material, which allows the phase transformation to occur. Finally, the appropriate grain size is necessary to ensure that the transformation occurs at the desired rate, as a finer grain size provides a greater surface area for diffusion and enhances the driving force. By taking these factors into account, the phase transformation can be controlled and optimized to achieve desired material properties.
Learn more about diffusion here:
https://brainly.com/question/14852229
#SPJ11
02. A 3-meter wide rectangular channel carries a flow of 10 m/s at a depth of 2 meters. a)Is this flow subcritical or supercritical? Show all calculations. b) What is the depth of the critical flow? Use g-9.81 m/s.
Answers
A 3-meter wide rectangular channel carries a flow of 10 m/s at a depth of 2 meters, as the Froude number (Fr) is greater than 1, the flow is supercritical.
a. Froude number (Fr) calculation:
Fr = V / sqrt(g * d)
Fr = 10 / sqrt(9.81 * 2)
Fr = 10 / sqrt(19.62)
Fr ≈ 2.245
Since the Froude number (Fr) is greater than 1, so, the flow is supercritical.
b) Calculating the critical flow depth: For rectangular channels, the specific energy equation can be used to determine the critical flow depth (dc) as follows:
E = y + (Q² / (2 * g * b² * y²))
\(V = (1.486 / n) * (R^{(2/3)}) * (S^{(1/2)})\)
\(y = ((V * (2b + 2y)) / (1.486 / n * (R^{(2/3)}) * (S^{(1/2)})))\)
\(Vc = (1.486 / n) * (Rc^{(2/3)}) * (S^{(1/2)})\)
\(Vc = (1.486 / 0.03) * (Rc^{(2/3)}) * (S^{(1/2)})\)
\(Rc = ((Vc * 0.03) / 1.486)^{(3/2)\)
\(Rc = ((10 * 0.03) / 1.486)^{(3/2)\)
Rc ≈ 0.161 m
The critical flow depth (dc):
dc = (Qc / (b * Vc))
dc = (10 / (3 * 0.161))
dc ≈ 20.50 m
Therefore, the approximate depth of the critical flow is 20.50 m.
For more details regarding Froude number, visit:
https://brainly.com/question/16197137
#SPJ4
The minimum fresh air requirement of a residential building is specified to be 0.35 air changes per hour (ASHRAE, Standard 62, 1989). That is, 35 percent of the entire air contained in a residence should be replaced by fresh outdoor air every hour. If the ventilation requirement of a 2.7-m-high, 200-m2 residence is to be met entirely by a fan, determine the flow capacity in L/min of the fan
Answers
Answer:
3150 L/min
Explanation:
The volume of the room is the product of the height of the room and its area. It is given as:
Volume (V) = height (h) × Area (A)
V = h × A
Height = 2.7 m, Area = 200 m². Hence:
V = h × A = 2.7 × 200 = 540 m³
The flow capacity (\(\dot {V}\)) is given by
\(\dot {V}=ACH*Volume\ of\ room\)
ACH = air changes per hour = 0.35
\(\dot {V}=ACH*Volume\ of\ room\\\\\dot {V}=0.35*540\\\\\dot {V}=189\ m^3/h\)
But 1 m³ = 1000 L, 1 hr = 60 min
\(\dot{V}=189\ m^3/h=\frac{189\ m^3*\frac{1000\ L}{1\ m^3} }{1\ h*\frac{60\ min}{1\ h} } =3150\ L/min\\\\\dot{V}=3150 \ L/min\)
QUESTION 4
D
Which of the four strokes of a four-cycle internal combustion engine is the shortest in crankshaft duration?
O A.Power
O b.Exhaust
O c. Intake
O d. Compression
Answers
Answer:
The answer will be B i hope this helps
A 36-mph wind blows against an outdoor movie screen that is 70 ft wide and 20 ft tall. Estimate the wind force on the screen. Use drag coefficient Cd = 1.15.
Answers
Answer:
The wind force on the screen is approximately 5,341.5936 \(lb_f\)
Explanation:
The speed of the wind, v = 36 mph
The width of the outdoor movie, w = 70 ft. wide
The height of the outdoor movie, h = 20 ft. tall
The drag coefficient, Cd = 1.15
We have;
\(C_d = \dfrac{F}{\dfrac{\rho \cdot v^2 \cdot A}{2} }\)
From which we have;
The wind force, F = 0.00256·\(C_d\)·v²·A
Where;
A = The cross sectional area of the rectangular outdoor movie screen, A = w × h
∴ A = 70 ft. × 20 ft. = 1,400 ft.²
The wind force, F = 0.00256 × 1.15 × (36 mph)² × 1,400 ft.² = 5,341.5936 \(lb_f\)
The wind force on the screen, F = 5,341.5936 \(lb_f\).
The wind force on the outdoor movie screen is;
F = 23437.26 N
We are given;
Wind speed; v = 36 mph = 16.0934 m/s
Width of screen; w = 70 ft = 21.336 m
Height of screen; h = 20 ft = 6.096 m
Drag coefficient; Cd = 1.15
Now formula for the drag force is;
F = ½•C_d•ρ•A•v²
Where;
F is drag force
C_d is drag coefficient
ρ is density of object
v is speed of object
A is area
Let us use density as 1.21 kg/m³
Area; A = wh = (21.336 × 6.096)
Thus;
F = ½ × 1.15 × 1.21 × (21.336 × 6.096) × 16.0934²
F = 23437.26 N
Read more about drag force at; https://brainly.com/question/11442373
Para conseguir jugo de naranja concentrada, se parte de un extracto con 7% en peso de sólidos el cual se mete a un evaporador al vacío. En el evaporador se elimina el agua necesaria para que el jugo salga con una concentración del 60% de peso de sólidos. Si se introducen al proceso 1000 kg/h de jugo diluido, calcule la cantidad de agua evaporada y de jugo concentrado saliente.
Answers
Answer:
Se obtendrán 116.66 litros de jugo concentrado, y el agua evaporada será por un total de 883.33 litros.
Explanation:
Dado que para conseguir jugo de naranja concentrada, se parte de un extracto con 7% en peso de sólidos el cual se mete a un evaporador al vacío, y en el evaporador se elimina el agua necesaria para que el jugo salga con una concentración del 60% de peso de sólidos, si se introducen al proceso 1000 kg/h de jugo diluido, para calcular la cantidad de agua evaporada y de jugo concentrado saliente se debe realizar el siguiente cálculo;
1000 x 0.07 = 70
60 = 70
100 = X
100 x 70 / 60 = X
7000 / 60 = X
116.66 = X
Por lo tanto, se obtendrán 116.66 litros de jugo concentrado, y el agua evaporada será por un total de 883.33 litros.
A standard 20° pressure angle, 20 tooth pinion with a diametral pitch of 12 rotates at 1776 rpm driving a mating gear at 740 rpm.a) How many teeth are there on the gear?b) What are the pitch diameters of the pinion and gear?c) What are the standard addendum and dedendum diameters of the pinion and gear?d) What is the theoretically correct center distance?e) What are the radial, tangential and normal tooth loads when contact between the pinion and the gear occurs at the pitch point and the gearset is transmitting ½ hp?
Answers
Answer:
A) 48
B) Pitch diameters : pinion = 42.164 mm, Gear = 101.19 mm
C) standard addendum : pinion = 46.3804, Gear = 105.406
standard dedendum : pinion = 37.265 mm, Gear = 96.312 mm
D) 71.672 mm
E) 94.989 N , 101.0858 N, 34.573 N
Explanation:
Given Data :
∅ = 20⁰ , Tp = 20 ( tooth pinion ),
diameter pitch = 12, Np = 1776 rpm ,
Ng = 740 rpm,
attached below is the detailed solution of the given problems
1. Write an SQL statement to display SKU and SKU_Description.
2. Write an SQL statement to display SKU_Description and SKU
3. Write an SQL statement to display WarehouseID.
4. Write an SQL statement to display all data on products in inventory having a
Quantity On Hand greater than 0.
5. Write an SQL statement to display the SKU and SKU_Description for products
having QuantityOnHand equal to 0.
6. Write an SQL statement to display SKU, SKU_Description, and WarehouseID for
all products that have a QuantityOnHand equal to 0 or a QuantityOnOrder equal
to 0.
7. Write an SQL statement to display SKU, SKU_Description, and WarehouseID for
all products that have a QuantityOnHand equal to 0 and a QuantityOnOrder
greater than 0.
8. Write an SQL statement to display the SKU, SKU_Description, WarehouseID, and
QuantityOnHand for all products having a QuantityOnHand greater than 1 and less than 10
Answers
SELECT used to access the records from one or more database tables and views. It also retrieves the selected data that follow the conditions we want.
1. Write an SQL statement to display SKU and SKU_Description.
SELECT sku, sku_description FROM inventory.
2. Write an SQL statement to display SKU_Description and SKU
SELECT sku_description, sku FROM inventory.
3. Write an SQL statement to display WarehouseID.
SELECT warehouseID FROM inventory.
4. Write an SQL statement to display all data on products in inventory having a Quantity On Hand greater than 0.
SELECT * FROM inventory WHERE QuantityOnHand > 0
5. Write an SQL statement to display the SKU and SKU_Description for products having QuantityOnHand equal to 0.
SELECT SKU, SKU_Description FROM inventory WHERE QuantityOnHand = 0
6. Write an SQL statement to display SKU, SKU_Description, and WarehouseID for all products that have a QuantityOnHand equal to 0 or a QuantityOnOrder equal to 0.
SELECT SKU, SKU_Description, Warehouse ID FROM inventory WHERE QuantityOnHand = 0 OR Quantity OnOrder = 0
7. Write an SQL statement to display SKU, SKU_Description, and Warehouse ID for all products that have a Quantity On Hand equal to 0 and a QuantityOnOrder greater than 0.
SELECT SKU, SKU_Description, WarehouseID FROM inventory WHERE QuantityOnHand = 0 AND QuantityOnOrder > 0
8. Write an SQL statement to display the SKU, SKU_Description, WarehouseID, and QuantityOnHand for all products having a QuantityOnHand greater than 1 and less than 10
SELECT SKU,SKU_Description, WarehouseID FROM INVENTORY WHERE QuantityOnHand > 1 and QuantityOnHand < 10
Learn more about SELECT here:
https://brainly.com/question/28180711
#SPJ4
List five areas that increased energy prices impact.
Answers
Answer:
Supply, demand, global markets, imports and exports, and government Regulation.
Explanation:
features of a dry leclanche cell
Answers
Answer:
Primary cell with a nominal open circuit voltage of 1.5 Volts produced in very high volumes. Chemistry based on a zinc anode and a cathode/depolariser of manganese dioxide which absorbs the liberated hydrogen bubbles which would otherwise insulate the electrode from the electrolyte.
Answer:
Explanation:
(1) The electrolyte is a paste of ammonium chloride.
(2) The positive terminal (anode) is a carbon rod surrounded bymangAnese Dioxide as a depolarised .
(3) The negative terminal is zinc container.
A investor will invest in mutual fundwith a probability of 0.6, will invest in government fundwith a probability of 0.3, and will invest in both fundswith a probability of 0.15. Find the probability that the investor will invest in either mutual fundor government fund.
Answers
Answer:
0.75
Explanation:
From this question above we have the following information
A = probability of investment in mutual fund= 0.6
B = probability of investment in government fund = 0.3
C = probability of investing in both the mutual fund and the government= 0.15
Where to find the probability of this investor investing in either of these two
= Prob(a) + prob(b) - prob(c)
= 0.6 + 0.3 - 0.15
= 0.9 - 0.15
= 0.75
thermal energy measured by?
Answers
Answer:
Thermal energy is measured using a thermometer denominated in Fahrenheit, Celsius and Kelvin
f. p. beer, e. r. johnston, d. f. mazurek, p. j. cornwell, and b. p. self, vector mechanics for engineers: statics and dynamics, 12th edition, mcgraw-hill, 2019
Answers
The book Vector Mechanics for Engineers: Statics and Dynamics, 12th Edition, McGraw-Hill, 2019 was written by F. P. Beer, E. R. Johnston, D. F. Mazurek, P. J. Cornwell, and B. P. Self.
The book has been widely used as a textbook for students in the field of mechanical engineering. The authors have done a great job in making the book a comprehensive reference material for engineering students who are interested in mechanics.The book covers topics such as statics, dynamics, kinematics, and kinetics of particles and rigid bodies. The book is also rich in examples and problem sets that help students apply the concepts learned in each chapter.
The authors have also included a chapter on vibration and time response which is a critical topic in mechanical engineering. Overall, the book Vector Mechanics for Engineers: Statics and Dynamics, 12th Edition, McGraw-Hill, 2019 is a valuable resource for students and engineers in the field of mechanical engineering.
The book is comprehensive, and the authors have done an excellent job in explaining the concepts in a way that is easy to understand. The book is recommended for students in the field of mechanical engineering.
To know more about Engineers visit:
https://brainly.com/question/31140236
#SPJ11
QUESTION 6
Which of the following is NOT a resume format?
01. Chronological
O2. Portfolio
3. Functional
04. Combination
Answers
technician a says to correct ride height by performing a wheel alignment. technician b says to check for bent suspension components if ride height is incorrect. who is right?
Answers
Technician A is right due to the fact if one facet is exceptional in peak it'll motive a pull. Ride height motive camber and need to be corrected earlier than any alignment adjustments.
To check ride height you could observe those steps:
Park the automobile on stage floor.Roll the automobile ahead and lower back permitting the suspension to relax.Grab your tape degree.Starting on the the front drivers facet wheel, degree from the middle of the wheel to the middle of the fender starting and note.Ride height or floor clearance may be defined as the quantity of area among the bottom of an vehicle tire and the bottom factor of the vehicle (normally the axle); or, greater properly, to the shortest distance among a flat, stage surface, and the bottom a part of a automobile apart from the ones elements designed to touch the floor.
Learn more about The Ride Height at https://brainly.com/question/28841987
#SPJ4