Version B NGR103/123-SP22 55. For problems 55 and 56: A cylindrical container is completely filled with a fluid that has a density of 91.7lbm/ft3. If the filled container weighs 127lbf, and the container weighs 2.00lbf when empty, what is the interior volume of the container? a. 0.734ft3 b. 1.38ft3 c. 43.9ft3 d. 44.6ft3 e. 1.36ft3 56. What is the specific weight of the fluid in the container? a. 2950lbf/ft3 b. 3.02lbf/ft3 c. 97.4lbf/ft3 d. 91.7lbf/ft3 e. Not enough information given

Answer:

take

play

are

sits

crouches

direct

indirect

direct

direct

indirect

Explanation:

i had just taken the test

Answer: i have no clue

Explanation:

Answer:

a) The amount by which this specimen will elongate in the direction of the applied stress is 0.466 mm

b) The change in diameter of the specimen is  - 0.015 mm

Explanation:

Given the data  in the question;

(a) The amount by which this specimen will elongate in the direction of the applied stress.

First we find the area of the cross section of the specimen

A = \(\frac{\pi }{4}\) d²

our given diameter is 20.5 mm so we substitute

A = \(\frac{\pi }{4}\) ( 20.5 mm )²

A = 330.06 mm²

Next, we find the change in length of the specimen using young's modulus formula

E = σ/∈

E = P/A × L/ΔL

ΔL = PL/AE

P is force ( 46300 N), L is length ( 201 mm ), A is area ( 330.06 mm² ) and E is  elastic modulus (60.5 GPa) = 60.5 × 10⁹ N/m² = 60500 N/mm²

so we substitute

ΔL = (46300 N × 201 mm) / ( 330.06 mm² × 60500 N/mm² )

ΔL =  0.466 mm

Therefore, The amount by which this specimen will elongate in the direction of the applied stress is 0.466 mm

(b) The change in diameter of the specimen. Indicate an increase in diameter with a positive number and a decrease with a negative number.

Using the following relation for Poisson ratio

μ = -  Δd/d / ΔL/L

given that Poisson's ratio of the metal is 0.33

so we substitute

0.33 = -  Δd/20.5 / 0.466/201

0.33 = -  Δd201 / 20.5 × 0.466

0.33 = - Δd201  / 9.143

0.33 × 9.143 =  - Δd201

3.01719 = -Δd201

Δd = 3.01719 / - 201

Δd  = - 0.015 mm

Therefore, The change in diameter of the specimen is  - 0.015 mm

The program starts by asking the user to enter the number of packages purchased. Below is the algorithm and programming code part of the given problem in python.

Algorithm of the given problem:

Python code with documentation:

# Get the number of packages purchased from the user

num_of_packages = int(input("Enter the number of packages purchased: "))

# Set initial values for discount and total

discount = 0

total = num_of_packages * 125

# Check the quantity purchased and calculate the discount according to the table

if num_of_packages >= 10 and num_of_packages <= 19:

   discount = total * 0.05

elif num_of_packages >= 20 and num_of_packages <= 49:

   discount = total * 0.15

elif num_of_packages >= 50 and num_of_packages <= 99:

   discount = total * 0.2

elif num_of_packages >= 100:

   discount = total * 0.3

# Calculate the total amount of the purchase after the discount

total -= discount

# Display the number of packages purchased, the amount of the discount, and the total amount of the purchase

print("Number of packages purchased: ", num_of_packages)

print("Discount amount: $" + str(discount))

print("Total amount of purchase: $" + str(total))

To learn more about Pyhton Programming, visit: https://brainly.com/question/30031634

#SPJ4

Answer:

BESUE THE 35

Explanation:

This question involves the concepts of power and current.

The power output of the motor is "10.08 hp".

The power output of the motor can be found using the following formula:

P = ηVI

where,

Therefore,

P = (0.9)(38 A)(220 V)

P = 7524 watt

converting this to horsepower:

P = (7524 watt)(\(\frac{1\ hp}{746\ watt}\))

P = 10.08 hp

Learn more about power here:

https://brainly.com/question/13948282

#SPJ1

Answer:

brown.

Explanation:

it could be brown.

The rating of the service disconnecting means for a single-family home must be at least 100 amperes, 3-wire.Therefore, 100 amperes is the required minimum rating of service size for a one-family home.

What is the service's required minimum ampere rating?

        To learn more about ampere rating  refer

       https://brainly.com/question/18975063

        #SPJ1

On publicly funded projects, a payment bond is often the only way to provide a level of protection for subcontractors and suppliers because it ensures that they will be paid for their work and materials even if the general contractor defaults on their obligations.

Payment bonds are a type of guarantee provided by a surety company on behalf of the general contractor, which helps mitigate the risks associated with non-payment. This financial security ensures timely compensation for subcontractors and suppliers, thus safeguarding their interests in the project.

Payment bonds ensure that contractors pay their material suppliers and subcontractors according to their contracts. Performance bonds provide a financial guarantee to project owners that their contractors will perform according to contract terms.

Learn more about subcontractors: https://brainly.com/question/29849053

#SPJ11

Answer:

I think it is D.service manual

Explanation:

Because it is the vehicle identification

Answer:

it's not included

Explanation:

plz exact ur explain

Answer:

si amor

Explanation:

Hoiykñjdnlklbutrk

The C++ program below will prompt the user to input three numbers and then output them in ascending order. The program takes three integer values as input and then prints them in ascending order.

Here's the program:

```
#include
using namespace std;

int main()
{
   int a,b,c,temp;

   cout<<"Enter three numbers: ";
   cin>>a>>b>>c;

   if(a>b)
   {
       temp=a;
       a=b;
       b=temp;
   }
   if(a>c)
   {
       temp=a;
       a=c;
       c=temp;
   }
   if(b>c)
   {
       temp=b;
       b=c;
       c=temp;
   }

   cout<<"Numbers in ascending order: "<

To know more about prints visit:

https://brainly.com/question/31443942

#SPJ11

Answer:

They both have the same efficiency.

Explanation:

The simple ideal Rankine cycle and an ideal regenerative Rankine cycle with one open feedwater heater would both have the same efficiency because the extraction steam would just create a mini cycle that recirculates. The energy given to the feedwater heater is proportional to the added heat in the boiler to the feedwater in the simple cycle to raise its temperature to the same boiler inlet condition.

Therefore in comparison, the efficiency is the same for both.

ᴄᴏᴍᴘʟᴇᴛᴇɴᴇꜱꜱ ᴍᴇᴀɴꜱ ᴛʜᴇ ꜱᴛᴀᴛᴇ ᴏꜰ ʙᴇɪɴɢ ᴄᴏᴍᴘʟᴇᴛᴇ ᴀɴᴅ ᴇɴᴛɪʀᴇ; ʜᴀᴠɪɴɢ ᴇᴠᴇʀʏᴛʜɪɴɢ ᴛʜᴀᴛ ɪꜱ ɴᴇᴇᴅᴇᴅ.

ʙᴇᴀᴜᴛʏ ᴍᴇᴀɴꜱ combination of qualities, such as shape, colour, or form, that pleases the aesthetic senses, especially the sight.

Answer:

The answer is below

Explanation:

Given that:

\(k_t=torque\ constant=0.075\ Nm/A\\\\k_v=voltage\ constant=0.12\ V/(rad/sec)\\\\R_a=armature \ resistance=2.5 \Omega\\\\V_t=terminal\ voltage=24\ V\\\\a)The \ starting\ current\ I_a\ is\ given \ as:\\\\I_a=\frac{V_t}{R_a} =\frac{24}{2.5} =9.6\ A\\\\The \ starting\ torque(T)\ is:\\\\T=k_tI_a=0.075*9.6=0.72\ N.m\)

b) The maximum speed occurs when the terminal voltage and back emf are equal to each other i.e.

\(V_t=e_b=k_v\omega\\\\\omega=\frac{V_t}{k_v}=\frac{24}{0.12} =200\ rad/s\)

c) The load torque is given as:

\(T_L=0.0125\Omega\\\\The\ motor\ torque \ is:\\\\T=k_t(\frac{V_t-k_v\omega}{R_a} )\\\\but\ T = T_L,hence:\\\\0.0125\omega=0.075(\frac{24-0.12\omega}{2.5} )\\\\0.03125\omega=1.8-0.009\omega\\\\0.04025\omega=1.8\\\\\omega=44.72\ rad/sec\\\\N=\frac{60\omega}{2\pi} =\frac{60*44.72}{2\pi} =427\ rpm\)

Answer:

Ceramics are generally made by taking mixtures of clay, earthen elements, powders, and water and shaping them into desired forms. Once the ceramic has been shaped, it is fired in a high temperature oven known as a kiln. Often, ceramics are covered in decorative, waterproof, paint-like substances known as glazes.

Explanation:

Answer:

made essentially from a nonmetallic mineral (such as clay) by firing at a high temperature.

Explanation:

The performance of environmental aspects is typically referred to as environmental performance. This term is used to describe the degree to which an organization's activities, products, or services impact the natural environment.

Environmental performance is becoming increasingly important for organizations as stakeholders and consumers demand greater transparency and accountability in environmental management.

Environmental performance is measured using a range of indicators, such as energy consumption, water usage, greenhouse gas emissions, waste generation, and pollution levels.

These indicators help organizations to identify their environmental impacts, set targets for improvement, and monitor progress over time.

There are several benefits to achieving good environmental performance, including:

1. Enhanced reputation and brand image: Organizations that demonstrate strong environmental performance can build a positive reputation and enhance their brand image, which can lead to increased customer loyalty and sales.

2. Regulatory compliance: Meeting or exceeding environmental regulations and standards can help organizations avoid fines, penalties, and legal liabilities.

3. Cost savings: Improving environmental performance can lead to cost savings through reduced resource consumption, improved efficiency, and waste reduction.

4. Competitive advantage: Organizations that prioritize environmental performance can gain a competitive advantage by differentiating themselves from competitors and attracting environmentally conscious customers.

Overall, environmental performance is a critical aspect of sustainable development, and organizations must prioritize it to ensure long-term success and resilience.

For more such questions on environmental aspects, click on:

https://brainly.com/question/30185569

#SPJ11

Answer:

It does not take into consideration what the responsible party knew about the law or regulation they violated. Environmental criminal liability is triggered through some level of intent.

In regards to whether an employee can be held legally liable for environmental violations, this statement is False.

This means that if an employee notices that a company is responsible for environmental violations, and does nothing about it, they could be held legally responsible for the violation as well.

In conclusion, this is true.

Find out more on environmental violations at https://brainly.com/question/15119899.

An unethical use of evaluation research results could be commissioning an evaluation on a state prison with the intention of providing evidence of poor performance to justify cutting funding.

Qualitative data analysis methods relies on the use of signs and symbols and their associated social meanings is Semiotics.

Evaluation research results are often used in making decisions about programs, policies, and practices. It is essential that the results of the evaluation are not misused or misinterpreted. Commissioning an evaluation on a state prison with the intention of providing evidence of poor performance to justify cutting funding is an example of unethical use of evaluation research results.

Semiotics is a type of qualitative research that analyzes data that has meaning to the people who have created it. It looks at the meanings that people attribute to objects, actions, and processes. Semiotics, unlike other forms of qualitative research, is concerned with the interpretation of meaning-making activities.

Learn more about Semiotics:

https://brainly.com/question/14869441

#SPJ11

Answer:

tires

Explanation:

without tyres you can not drive.

Answer:

d spurving bearings

Explanation:

because IN a car you can't move without them.in the old days they were using wood as tires

To answer your question, yes they do.

In 1963 the Institute of Radio Engineers and the American Institute of Electrical Engineers merge to D. Institute of Electrical and Electronics Engineers (IEEE)

The Institute of Electrical and Electronics Engineers was created in 1963 by the Union of the Institute of Radio Engineers (IRE) and the American Institute of Electrical Engineers (AIEE) (IEEE).

Hence, it can be seen that the two organizations were merged with the intention of forging a stronger, more cohesive professional association for electrical and electronics engineers.

With over 400,000 members in more than 160 countries, the IEEE is the biggest technical professional organization in the world today and is committed to promoting technology for the benefit of humanity.

Read more about engineering here:

https://brainly.com/question/28321052

#SPJ1

Answer:

it's C

Explanation:

hopefully that helps you

The Breaker bar is not a power wrench, the power wrench are impact, air ratchet, and air hammer option (C) is correct.

To swiftly tighten or loosen nuts, use a power or impact wrench. They are essentially tiny, portable electric or pneumatic motors with high-speed socket wrench rotation.

As we know,

An impact wrench also referred to as an impactor, impact gun, air wrench, air gun, rattle gun, torque gun, or windy gun, is a type of socket wrench power tool that uses a rotating mass to store energy before abruptly releasing it into the output shaft to produce high torque output with little user effort.

Thus, the Breaker bar is not a power wrench, the power wrench are impact, air ratchet, and air hammer option (C) is correct.

Learn more about the power wrench here:

https://brainly.com/question/10186385

#SPJ2

Both Technician A and Technician B are correct regarding the light film of oil observed on the upper area of a shock absorber.

Technician A says that the condition of the light film of oil observed on the upper area of a shock absorber should be considered normal. Technician B says that during cold weather, a rod seal may bleed fluid, causing the oil film. Both of them are correct because a light film of oil on the upper area of a shock absorber may result from any of the following: Heat generated during shock operation and component temperature differences may cause oil to expand and migrate up the piston rod, which may appear as a light film on the upper part of the shock absorber's housing.

During cold weather, a rod seal may bleed fluid, resulting in an oil film on the shock absorber's upper area. During cold weather, fluid seepage past a seal due to lower viscosity is typical. Leakage is occasionally observed when the shock absorber has been in operation for a longer period. A certain amount of leakage past the rod seal and out the weep hole is typical in most high-pressure hydraulic systems. This leakage might be misting or a trickle of fluid.

To know more about this visit - A light film of oil is observed on the upper area of a shock absorber : https://brainly.com/question/26754018

#SPJ11

The hot iron's initial temperature is 157545°C.

What is iron?

Iron has the atomic number 26 and the chemical symbol Fe. It is a metal from the first transition series and group 8 of the periodic table.

Given mass of the iron mi = 400 kg

Specific heat capacity of iron Ci; = 0.04 Jkg⁻¹k⁻¹

Mass of water Mw = 30 kg

Specific heat capacity of water C w = 4200 Jkg⁻¹ k⁻¹

Temperature of water Tw = 10°c

Mass of Calorimeter Mc = 120 kg

Specific heat capacity of Calorimeter Cc = 0.1 Jkg⁻¹K⁻¹

Final temperature of the mixture of T f = 30°c

Let Ti be the initial temperature of the iron.

We know that, heat lost and heat gained will be equal.

So,

Mc Cc ( T f - 10 ) + Mw C w ( T f - 10 ) + Mi Ci; ( T f - T i ) = 0.

=120 x 0.1 ( T f - 10 )+ 30 x 4200 (T f - 10) + 400 x 0.04 (T f - T i) = 0.

=12Tf - 120 + 126000Tf - 1260000 + 16Tf - 16 T i = 0

= - 16 T i = 1260120 ( 26028 x T f)

T i = 157545°C.

To learn more about iron
https://brainly.com/question/150962
#SPJ9

Answer:

No because it is something to gain knowledge of peoples lives.

Answer: i was not suprised because, it is something all people need to know to gai  knowledege about it.

KINDLY NOTE that there is a picture in the question. Check the picture below for the picture.

==================================

Answer:

(1). 1.2 metres.

(2). There is going to be the same pressure.

Explanation:

From the question above we can take hold of the statement Below because it is going to assist or help us in solving this particular Question or problem;

" Measurements indicate that the material of tank B will fail and the tank will burst if the air pressure in tank B exceeds 18 kPa."

=> Also, the density of oil = 930

That is if Pressure, P in B > 18kpa there will surely be a burst.

The height, h the can waste oil be poured into tank A is;

The maximum pressure  = height × acceleration due to gravity × density) + ( acceleration due to gravity × density × height, j).

18 × 10^3 = (height, h ×  10 × 930) + 10 × (2 - 1.25) × 1000.

When we make height, h the Subject of the formula then;

Approximately, Height, h = 1.2 metres.

(2). If air is accidentally trapped in the manometer line, what will be the error in the calculation of the height we will have the same pressure.

Answer:

Answer to the following question is as follows;

Explanation:

The amount of alcohol consumption can be influenced by a variety of things, including food.

The proportion and pace at which alcohol reaches the circulation is affected by drinking rate, body mass, and the size of the beverage. Alcohol enters your system as soon as it reaches that first sip, as per the National Institute on Drug Abuse and Alcoholism. After 10 minutes, the results are noticeable.

An agrarian and handicraft economy was replaced by one that was dominated by industry and machine manufacturing during the Industrial Revolution in modern history. The world as a whole was affected by this process after it started in Britain in the 18th century.

These first three industrial revolutions shaped our contemporary society. The world we live in underwent a fundamental transformation with the advent of each of these three innovations: the steam engine, the age of science and mass production, and the rise of digital technology. And right now, it's taking place once more, for the fourth time.

The term is frequently used to describe emerging technologies, or those expected to become available in the next five to ten years. It is typically reserved for technologies that are having, or are anticipated to have, significant social or economic effects.

To know more about technology visit:

https://brainly.com/question/28232063

#SPJ9